Power switch settings for different conditions

Different machine settings are required depending on how the machine is being used.

In use, doing active testing

The machine is on the field performing tests.

Transport inside the stadium

Moving the machine around the stadium. This allows use of mobility without other test functions.

In use for data review or standby <1 hour

The machine is being used after testing to review data or for short standby periods.

Idle >1 hour

The machine sits idle for more than an hour and cannot be plugged in.

Do not leave the machine unplugged for more than 1 month.

Storage/charging

The machine is unused for >10 hours. After plugging in, the amber LED should illuminate.

Extended remote access

Software or firmware updates. The machine should be charging for this. This allows remote access to the machine.